How To Remove Water Inside Phone Screen

How To Remove Water Inside Phone Screen

There is nothing more panic-inducing than seeing your phone soaked in water. If you are going through a similar situation, you have come to the right place. Here is how to remove water from inside the phone screen. Act swiftly by powering down the device, removing the SIM card, and gently shaking out excess water. Avoid the rice myth and opt for more effective alternatives like silica gel packets or uncooked instant oatmeal to absorb moisture. Allow your phone to thoroughly dry for 24-48 hours before attempting to power it on. If DIY efforts prove unsuccessful, seek professional assistance to ensure a dry and functional future for your device

To learn more about how to remove water from inside the phone screen, keep reading the article.

Tips On How To Remove Water From Inside The Phone Screen

Here is how to remove water from inside the phone screen:

Power Down Immediately

The golden rule when water infiltrates your phone screen is to power it down ASAP. Electricity and water don’t mix, and turning off your device helps prevent potential short circuits. If possible, remove the battery (for phones with removable batteries) to cut the power completely.

Dry the Exterior

Gently wipe the exterior of your phone with a soft, absorbent cloth to remove any visible water. Pay extra attention to ports, speakers, and buttons. Be cautious not to push water into openings further, as that could worsen the situation.

Remove SIM Card and Tray

Extract the SIM card and tray to prevent water from seeping into sensitive areas. The SIM card removal also provides better airflow within the phone, aiding in the drying process.

Shake It Out

This may be one of the obvious solutions when you’re figuring out how can you remove water from inside the phone screen. Give your phone a gentle shake to dislodge any trapped water. Hold the device at various angles to encourage water drainage from ports and crevices. Just avoid vigorous shaking, as this could cause more harm than good.

Use a Vacuum Cleaner

If you dropped your phone into the water, consider using a vacuum cleaner with a small nozzle attachment. Hold the nozzle near the openings (like charging ports and headphone jacks) to help suction out moisture. Remember, gentleness is the key.

The Rice Myth to Remove Water From Inside The Phone Screen 

The age-old advice of submerging your waterlogged phone in a bowl of rice has circulated for years. However, it’s time to debunk this myth! While rice can absorb some moisture in the surrounding air, it’s not the most effective solution for drying out your phone. Instead, opt for better alternatives to remove water from inside the phone screen.

1. Silica Gel Packets

Silica gel packets, those tiny desiccants often found in new shoes or electronic packaging, are a superior alternative to rice. Place your phone and the packets in a sealed container to accelerate the drying process. Silica gel actively absorbs moisture, offering better results than rice.

2. Uncooked Instant Oatmeal Packets

Uncooked instant oatmeal packets can act as moisture absorbers. Similar to silica gel, place your phone and the uncooked oatmeal packets in an airtight container. The oats will draw moisture away from your device.

3. Commercial Drying Kits

Consider investing in commercial drying kits designed specifically for wet phones. These kits often include moisture-absorbing agents and are more effective than the rice method.

The Final Test: Turning It On

After your phone has undergone its drying spa treatment, resist the urge to power it on immediately. Allow at least 24 to 48 hours for thorough drying. Once you’re confident it’s completely dry, power it up and cross your fingers. If all goes well, you’ve successfully navigated the treacherous waters of phone submersion!

When All Else Fails, Ask The Experts!

If your DIY efforts don’t yield positive results, it’s time to look for expert phone repair services. They specialize in rescuing devices from water damage, and skilled technicians have the expertise to disassemble, dry, and repair your phone, giving it a second chance at life!

Wrapping Up

So there you have it – a comprehensive guide on how to remove the water from the phone screen. When water infiltrates your phone screen, swift and proper action is crucial. Follow these tips to fix a phone that fell in the water and won’t turn on. Remember, the rice myth is a thing of the past, and alternative methods like silica gel or commercial drying kits offer better results. If DIY efforts fall short, don’t hesitate to reach out to Fix My Gadget for professional assistance. Here’s to a dry and functional future for your beloved device!

Frequently Asked Questions

How do I get water out of my phone screen?

Swiftly power down your device, remove the SIM card, gently shake out excess water, and place it in an airtight container with silica gel packets for effective moisture absorption.

How do I fix moisture on my phone screen?

To tackle moisture on your phone screen, power off the device, remove the SIM card, gently shake it, and then use silica gel packets or uncooked instant oatmeal in an airtight container for optimal drying.

How do you remove moisture from a screen?

Efficiently remove moisture from a screen by promptly turning off the device, shaking out excess water, and employing moisture-absorbing agents like silica gel or uncooked instant oatmeal in a sealed container for effective drying.